Dusty Harp Pickup Options: P10 and P20

Discover the Dusty Harp Pickup options designed to enhance your harp experience:

• P10 Pickup: Perfect for 24-30 string lever harps such as the Ravenna 26 Lever Harp and Allegro 26 Lever Harp.

• P20 Pickup: Ideal for most 32-40 string lever harps like the Ravenna 34, Crescendo 34, and Boulevard 34 Lever Harps.

Choose the option that best fits your needs:

• DIY Installation: Suitable for harp owners looking to install the pickup themselves. This option requires Drill Bit.

Harps are particularly difficult to amplify because of their long soundboards.

After extensive development and testing, the Dusty Harp Pickup was launched. Rather than relying on one (or sometimes two) contact points, which can't help but pick up more sound from the notes that are close by and less sound from the notes farther away, our pickup has 4 carefully selected piezo elements spaced along the length of the soundboard. (Three elements in the case of the smaller P10.) This creates a balanced and focused sound throughout the whole range of the harp. The full, rich bass notes blend with the clear mids and highs, providing natural-sounding amplification at any volume level. It's simply the sound of the harp, only bigger!

The pickup is discreetly mounted inside the soundbox, invisible to the audience. A single jack mounted on the back of the harp makes for "plug and play" ease of use. An instrument cable (not included) connects your harp directly to any amplifier and most PA systems. In most situations a preamplifier is not needed, but if you are playing in situations requiring very high volume, you may want to add one. In addition to boosting the signal, it will give you direct control over your volume and tone. With some amplifiers, a preamp can also sweeten and smooth out your sound.

We can install the Dusty Harp Pickup in any new or existing Dusty Strings harp, and it can also be done by harp owners who are handy with tools or by any instrument repair technician. Installation involves attaching mounting clips to the internal braces or sides of the harp, snapping the cable harness into the clips, gluing the elements in place, and drilling a hole to mount the jack in the back of the harp. There are detailed instructions and a template for placing the elements in Dusty Strings harps. If you have a different type of harp, use the template as a starting point, but it's a good idea to experiment with the element placement to confirm the best-sounding attachment points. The only tool you'll need is a ½-inch brad point drill bit, available at most hardware stores or from us. If you prefer not to drill a hole, you can simply connect to the jack through the bottom soundhole of your harp, or add our Jack Clamp for a secure and removable way to anchor the jack.

Please note that the pickup produces the best possible sound when the elements are super-glued to the back of the soundboard, as specified in the instructions. If you choose to use double-stick tape for a less permanent installation, you will have a challenge getting the volume loud enough, and you will not get the sound quality this pickup is known for. Once the pickup is glued in, it can be removed if desired, although we don't recommend that because it is too easy to damage the elements in the process. In any case, the presence of a high-quality pickup system will enhance the appeal and value of your harp.

If you're curious about the installation process, you can download and read the installation instructions for lever harps (P10, P20.

Check out our blog for background information on terminology and amplification basics.